+ Toggle navigation

Water & Acid Leak Detection Locating Solution

With FG-ALS8 Unit

This water leak or acid leak detection solution contains FG-ALS8 leak detection alarm unit, FG-ECS water sense cables / FG-ACS acid sense cables and system accessories.

Diagram - Water & Acid Leak Detection Locating Solution WITH FG-ALS8 UNIT

Eight zones leak detection and location unit FG-ALS8 : The FG-ALS8 is a new solution for water leak detection and acid leak detection. Eight detection zones are available on this small unit, it can control up to 100 metres of water or acid sense cable per zone. A touch-screen gives clear indications of the system status. 9 relays are integrated and RS485 serial link with MODBUS /JBUS communication protocol for interfacing with BMS is available.

Water sense cable FG-ECS : The FG-ECS sense cable has a spliced junction with a length of 3.5 metres of jumper cable and an end termination. It detects the presence of water and base liquids at any point along its length. The FG-ECS sense cable is designed to be connected to analog alarms (FG-ALS8, FG-ALS4, FG-ALS & FG-A) or digital units (FG-NET & FG-SYS, via diversion box FG-DTCS). It detects and locates the leak when connected with locating units.

Acid sense cable FG-ACS : The FG-ACS sense cable has a spliced junction with a length of 3.5 metres of jumper cable and an end termination. It detects the presence of acid and corrosive chemical liquids at any point along its length. The FG-ACS sense cable is designed to be connected to analog alarms (FG-ALS8, FG-ALS4, FG-ALS & FG-A) or digital units (FG-NET & FG-SYS, via diversion box FG-DTCS). It detects and locates the leak when connected with locating units.

 

Sign up with your email address to receive our newsletter featuring our newest products, project case studies, useful information about water and fuel leak detection, and much more!